Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Problem | Possible fault | Solution | ||
The Start/Stop indicator | The machine is not | Insert the plug. | ||
does not flash after the | plugged in. |
|
| |
dishwasher was turned | The fuse has tripped. | Reset the circuit breaker. | ||
on "". | ||||
| See data plate for | |||
|
| |||
|
| minimum amperage. | ||
The dishwasher stops | The fuse has tripped. | Reset the circuit breaker. | ||
during a program. |
| See data plate for | ||
|
| minimum amperage. | ||
The program cycle | There may be a technical | – | Turn the dishwasher off | |
indicators "Rinse", | fault. |
| "". | |
"Drying" and "End" |
| After a few seconds: | ||
flash simultaneously. |
| – | Turn the dishwasher | |
The time display shows |
| |||
|
| on. | ||
FXX. |
|
| ||
| – | Select the desired | ||
|
| |||
|
|
| program with the | |
|
|
| program button. | |
|
| – | Press the "Start/Stop" | |
|
|
| button. | |
|
| If the problem persists | ||
|
| contact Technical | ||
|
| Service. | ||
The drain pump is | Fault F70: | – Turn off the water | ||
running when the door | The waterproof system |
| supply. | |
is open. | has activated. | – | Contact Miele | |
|
|
| Technical Service. | |
35
