Before using for the first time
Rinse aid indicator
When the rinse aid indicator first comes on, there will be enough rinse aid left for 2 - 3 washes.
The rinse aid indicator on the control panel will light when the rinse aid reservoir needs refilling.
If the "Tab" function is selected, the rinse aid indicator will not light, see "Additional options - Tab".
Adjusting the dosage
The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6.
–Use a higher setting if spots appear on dry glassware.
–Use a lower setting if streaking appears on dishes or glasses.
Turn the dishwasher off "".
Press and hold the "Start/Stop" button and at the same time turn the dishwasher on "". Hold the "Start/Stop" button until the "Start/Stop" indicator comes on.
If it does not come on, start over.
Press the "Delay Start" button three times.
The "Delay Start" indicator flashes 3 times in intervals.
The time display shows "p 3". A rinse aid amount of 3 ml is selected (factory default setting).
The set value is shown in the time display after the "p".
Select the desired setting with the "Start/Stop" button. Every touch of the button adjusts the level.
The programmed dosage is saved.
Turn the dishwasher off "".
15
