![](/images/new-backgrounds/1331936/3319365x1.webp)
360° Line Laser KH 3006
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Also, give these operating in- structions to whoever might acquire the appliance at a future time.
Safety instructions ![](/images/new-backgrounds/1331936/3319365xi2.webp)
Risk of personal injury!
•Keep and store the appliance out of the reach of children.
•Regularly check the condition of the batteries. Leaking batteries can cause damage to the laser appliance.
•If you do not intend to use the laser appliance for an extended period, remove the batteries.
•Always change all batteries at the same time and always use batteries of the same type.
•Clean the battery compartment with a dry cloth.
•No liabilty will be accepted for damage resulting from manipulation to the laser equipment as well as from disregarding these safety instructions.
This laser appliance contains a Class 2 Laser. NEVER direct the laser beam at people or animals. NEVER look directly into the laser.
The laser beam can cause serious eye damage.
•Do NOT direct the laser beam at strongly reflective material. Reflected laser beams are also dangerous.
•In the event of the batteries leaking acids, wear protective gloves. There is a risk of receiving chemical burns!
Beware of appliance damage!
•NEVER subject the appliance to rain. Do not use the appliance in wet or moist environments.
•Do not use the appliance at locations where there is a danger of fire or explo- sion, e.g. in the vicinity of inflammable liquids or gases.
•All adjustments intended to increase the laser power are forbidden.
•To avoid damage to the appliance, arrange for repairs to be carried out only by our Customer Services Depart- ment or qualified specialists.
Intended use
The appliance is intended for use in making alignments and determining angles in domestic construction work.
The appliance is intended for domestic purposes only, not for commercial purposes.
Items supplied
•Laser appliance with rotating plate
•2 Batteries 1.5 V, Type AAA/LR03
•Operating instructions
•Warranty card
Technical Data
Power supply:
2 Batteries 1.5 V, Type AAA/LR03 Measurement accuracy:
±6,35 mm over 5 meters Laser class 2
(≤5 mW, λ= 650 nm)
- 1 - |