Description of the appliance
qON/OFF Switch w Floodlight lever e Halogen floodlight r Protective grill
t Knurled screw y Crossbeam
u Telescopic stand i Power cable o Knurled screw a Fixing ring
s Distributor box d Knurled screw f Fixing screw g Glass cover
Assembly
Danger of electrical shock
Never insert the plug into an electrical socket until the appliance has been completely assembled.
Danger of burns
Only touch the halogen lamps when they are in a
Opening up the pedestal base
➩To set up the telescopic stand u, loosen the knurled screw, o. The pedestal base can now be opened out to the floor.
➩Turn the knurled screw o until it is tight.
Assemble the protective grill r on to the halogen spotlights e
➩Insert the lower pegs of the protective grill r into the recesses on the corners before the glass covering g.
➩Squeeze the protective grill r so far together that the pegs on the other side of the protective grill can be inserted into the recesses there.
➩Do the same with the second halogen spotlight
Mounting the halogen floodlights e on the crossbeam.
➩Insert the knurled screw t with the washer through the hole in the bracket of the halogen floodlight e.
➩Insert the halogen floodlight e with the knurled screw t in the
➩Turn the knurled screw t until it is tight.
Assembling the crossbeam on the telescopic stand.
➩Insert the knurled screw d first of all through the hole in the distributer box s, then through the hole in the crossbeam y.
➩Now assemble the crossbeam y and the distri- butor box s with the assistance of the knurled screw d on the telescopic stand u.
➩Turn the knurled screw d until it is tight.
Adjusting the height of the Stand Halogen Floodlight
➩Loosen the fixing ring a by turning it in an
➩Adjust the telescopic stand u to the desired height.
➩Retighten the fixing ring a by turning it in a clok- kwise direction.
- 3 -
