Kompernass KH 4083 manual Operate, Programming

➩Press the „+“ button or the „–“ button to set the current hour.

➩Confirm your selection with the button.

The minute value now blinks in the display y.

➩Press the „+“ button or the „–“ button to set the minutes.

➩Confirm your selection with the button.

The clock is now set.

➩Press the „M“ button to return to automatic mode.

Operate

Programming

You can programme up to 8 switching sequences with different amounts of water flow-through.

➩ Press the „M“ button until a bar is shown above the in the display y.

The watering computer is now in the programming mode. Blinking in the display y, to the right of the % symbol, is the notification 100%.

- 7 -