Kompernass KH 4164 Technical data, Items supplied, Assembly, Appliance description, Utilisation

Technical data

Mains voltage:	230-240 V ~ 50Hz
Power cable length:	1.8 m with switch
Power consumption :	50 W
Protection class:	II /
Bulb type:	max. 50 W / GU 10
Lamp base:	16 cm in diameter

Items supplied

1 Desk lamp, pre-assembled

1 Counterweight

1 Hexagon spanner

1 Suction disc for bulb exchanges

1 Operating manual

•Check to ensure that the appliance is undamaged, all component parts are present and that pack- aging remnants are removed from it.

Assembly

For reasons of transportation the lamp is supplied pre/assembled.First put the components together completely before operating the lamp:

•Turn the counterweight q onto the rear of the swivel-arm.

•Carefully pull the power cable w so far out of the lamp base until the swivel arm is flush in the lamp base.

•Lock the swivel arm into the lamp base with the hexagon spanner e.

•Place the suction disc r onto the front of the bulb and press it firmly. Guide the bulb into the bulb holder and secure it by turning it through a quarter-turn in a clockwise direction.

Attention!

Do not forget to remove the suction disc! Do NOT operate the lamp with the suction disc fitted – it would be melted immediately by the heat.

Appliance description	Utilisation
q Counterweight
w Power cable	• Place the lamp at a suitable location, as detailed
e Hexagon spanner	in the Safety Instructions.
r Suction disc	• Insert the power cable into the wall socket. You
t Switch	can now switch the lamp on and off at the
y Lever for lamp adjustment	switch t.
u Lever for swivel-arm locking	• Always adjust the position of the lamp with the
	lever y, not with the lamp housing. This can
	get very hot when in use.
	• You can adjust the swivel-arm in that you first
	loosen the locking device u. Move the swivel-
	arm to the desired position and then retighten
	the locking device.

- 5 -