![Changing bulbs](/images/new-backgrounds/42002/4200211x1.webp)
Changing bulbs
CAUTION!
Check to ensure that the power plug is remo- ved from the wall socket. If the lamp has been in use, first allow it to cool down completely.
This avoids the potential risk of being burnt.
•Place the suction disc r onto the front of the defective bulb and press it firmly.
Turn the bulb through an
•Now place the suction disc r onto the front of the replacement bulb and press it firmly. Guide the bulb into the bulb holder and secure it by turning it through a
Attention!
Do not forget to remove the suction disc! Do NOT operate the lamp with the suction disc fitted – it would be melted immediately by the heat.
Cleaning
CAUTION!
Check to ensure that the power plug is removed from the wall socket. If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt.
•Clean the appliance only with a dry or lightly moistened cloth. Do not use abrasive cleaners or detergents, these could damage the surfaces.
Maintenance
Attention!
NEVER open any components of the lamp! Arrange for the appliance to be repaired by specialists only.
The appliance is
Disposal
Do not dispose of the appliance in your normal
domestic waste. This also applies for used
bulbs.
Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally friendly manner.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
www.kompernass.com
- 6 -