Technical data |
| Utilisation |
Mains voltage: | |
Power cable length: | ca. 2 m with switch |
Power consumption : | 40 W |
Protection class: | II / |
Bulb type: | max. 40 W / E 14 |
| (Not supplied): |
Lamp base: | 14.5 cm in diameter |
Items supplied
1 Desk Lamp
1 Operating manual
•Check to ensure that the appliance is undamaged, all component parts are present and that packag- ing remnants are removed from it.
Description of the appliance
qBulb socket w Lamp shade e Swan neck r Switch
•Place the lamp at a suitable location, as detailed in the Safety Instructions.
•Insert the power cable into the wall socket. You can now switch the lamp on and off at the switch r.
•Alter the direction of illumination by means of the flexible swan neck only e, not with the lamp shade w. The lamp shade can get very hot when the lamp is in use.
Changing the bulb
CAUTION!
Check to ensure that the power plug is removed from the wall socket. This avoids the potential risk of electric shock! If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt.
•Turn the bulb
•Insert the new bulb into the bulb holder and secure it by turning it in a clockwise direction.
Taking into use |
| Cleaning |
To be able to take the desk lamp into use it must first of all be fitted with a bulb (40W / E14).
•Insert the bulb into the bulb holder and secure it by turning it in a clockwise direction.
CAUTION!
Check to ensure that the power plug is removed from the wall socket. This avoids the potential risk of electric shock! If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt.
•Clean the appliance only with a dry or lightly moistened cloth. Do not use abrasive or aggres- sive cleaning agents, these could damage the upper surfaces.
- 6 -
