Kompernass KH 4412 manual Preparing for cold lamination

The attainment of the operating tem- perature is indicated through the ligh- ting up of the green LED indicator lamp

"Ready" y. For a more uniform laminating result we recommend, especially for thinner foils (below 125 Micron) and with adjustment to a dif- ferent foil thickness, to first wait an additional ca. 2-3 minutes before beginning with lamination.

➩Lay the document to be laminated into a laminating pouch of the appropriate size.

Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for lami- nating. First open it up, as shown in Fig. 2.

Fig. 1

For information about the lamination process, please read section 10.

Fig. 2

9.Preparing for cold lamination

If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rolls inside the laminator will still be hot. These can damage the laminating pouch and the document to be laminated!

➩Insert the pouch guide q into the holes provided on the rear of the laminator.

➩Fold apart the pouch guide q.

➩Insert the laminator power plug into a power socket.

- 7 -