SCREEN SAVER
* * GENERAL SETUP PAGE * *
TV DISPLAY | WIDE |
|
ANGLE MARK | OFF |
|
OSD LANGUAGE | ENG |
|
CLOSED CAPTIONS | OFF |
|
SCREEN SAVER | ON | ON |
LAST MEMORY | OFF | OFF |
SCREEN SAVER |
|
|
•To activate the screen saver set this function to ON. The screen saver will now switch on when the playback is stopped and no activity takes place for several minutes.
•To switch the screen saver off set the function to OFF.
LAST MEMORY
* * GENERAL SETUP PAGE * *
TV DISPLAY | WIDE | |
ANGLE MARK | OFF | |
OSD LANGUAGE | ENG | |
CLOSED CAPTIONS | OFF | |
SCREEN SAVER | ON | |
LAST MEMORY | OFF ON | |
|
| OFF |
SET LAST MEMORY STATE
•Select the setting ON to playback a disc from the previous halted position after removal and re- insertion.
•with the setting OFF disc playback starts from the beginning.
Note:
When the DVD player is switched off the saved position is not retained.
8.2 DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT
* * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT | RAW | OFF |
LPCM OUTPUT | 48 K | RAW |
|
| PCM |
SETUP SPDIF
Select the input DIGITAL OUTPUT to set the SPDIF audio output signal.
OFF: Select OFF when there is to be no digital signal output.
PCM: Select PCM (Pulse Code Modulation) when a connection to a digital amplifier/receiver exists. Your DVD player transmits, through the PCM signal, the same audio formats that are rendered on the disc. In addition there will be an audio signal output via the left/right connection.
RAW: The DVD player outputs the raw data of the Dolby Digital sound (default setting).
* * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT | PCM |
LPCM OUTPUT | 48 K 48 K |
| 96 K |
SETUP LPCM
Select the input LPCM OUTPUT to set the sampling frequency for the processing of the raw data.
48 K: Default setting.
96 K: Only for DVDs with the corresponding sampling frequency.
Note:
The LPCM OUTPUT function is only available if you have set the SPDIF audio output signal to PCM.
- 14 - |
