The textile tool is intended for the thorough cleaning of car seats, mattresses, cushions, curtains, wall coverings. We recommend a low power setting for delicate surfaces (curtains, wall hangings).
•Special tool
This tool is intended for cleaning delicate parts or electrical/mechanical devices. You can also use the special brush for furniture, lamps etc.
Replacing the dust bag
The flashing dust bag filling level indicator 2 lets you know when the dust bag is full and needs to be changed.
Removing the dust bag:
•Switch the appliance off and pull the plug out of the mains socket.
•Remove the hose from the appliance. To do this, press both buttons * on the end of the hose.
•Press the button ( on the vacuum cleaner carrying handle and fully open the cover.
•The dust bag container 6 can be easily removed using the carrier.
•Take the dust bag out of the dust bag container 6 and remove the dust bag from the adapter 7. To do this, press the clip 8 at the rear of the adapter. Inserting the dust bag:
•Slide a new dust bag on to the adapter 7 (note the direction of the arrow) and engage the clip 8.
•Slide the adapter into the adapter guide on the dust bag container 6 and place the container into the dust bag container compartment 0.
•Close the cover, making sure it engages.
You can order replacement dust bags in a kit with a replacement filter using the special card.
Changing the filter
You should change the filter 9 about every 20 full bags or after particularly heavy use (check visually). You can remove large particles of dirt from the filter by tapping it.
You can order a replacement filter in a kit with replacement dust bags with using the special card.
Care and cleaning of the vacuum cleaner
01. Before you clean the vacuum cleaner always switch it off and pull the plug out of the socket.
02. To prevent electric shock do not clean the vacuum cleaner with water and never allow the vacuum cleaner to be in contact with water.
03. Use a damp or dry cloth to clean the vacuum cleaner. Only clean the housing and the accessories.
04. The outlet air filter 4 and the internal motor filter 9 should be cleaned regularly.
05. Do not use any aggressive cleaning agents or solvents as these may attack the plastic.
8
