Kompernass KH 980 Intended Use, Items supplied, Description of the appliance, Technical data

Models: KH 980

1 10
Download 10 pages 21.33 Kb
Page 4
Image 4

Universal Battery Charger KH 980

Intended Use

The Universal Battery Charger is intended exclusively for:

the charging of rechargable Ni-Cd and Ni-MH batteries with the sizes AAA/AA/C/D and 9 V Block.

domestic use only, it is not intended for commer- cial use.

Items supplied

Universal Battery Charger KH 980

Operating manual

Guarantee Card

Description of the appliance

qCharging slots for 9 V Block batteries (Charging slots 5 and 6)

w Charging slots for AAA/AA/C/D batteries (Charging slots 1 to 4)

eLEDs

Technical data

Input voltage:

100–240 V / 50–60 Hz

Power consumption: 25 W

Protection class:

II /

Charging currents:

6 x AAA (Micro) = 330 mA

6 x AA (Mignon) = 1000 mA

4 x C (Baby), D (Mono) = 1000 mA

2 x 9 V Block = 60 mA

Safety instructions

Fire hazard!

Do not place the Universal Battery Charger:

where it would be subject to direct sunlight. It could happen that the Universal Battery Charger overheats and becomes irreparably damaged.

in close adjacency to sources of heat. This inclu- des for example ovens, fan heaters and similar appliances, as well as the ventilation openings of electrical devices. The Universal Battery Charger could be irreparably damaged.

in damp environments or in the vicinity of water. Moisture could permeate into the Universal Battery Charger. There would then be the danger of receiving an electric shock and or causing a fire!

Only charge rechargable batteries of the types „Ni-Cd“ and „Ni-MH“. NEVER recharge batte- ries of other types or non-rechargable batteries. These are not suitable for recharging. Batteries not suitable for recharging can overheat and explode. It could irreparably damage the Universal Battery Charger and the inserted batteries. There is also a risk of personal injury!

- 2 -

Page 4
Image 4
Kompernass KH 980 Intended Use, Items supplied, Description of the appliance, Technical data, Safety instructions