Commissioning
•Before taking the Universal Battery Charger into use, check that all items are complete/available and free of visible damage.
•Place the Universal Battery Charger on a straight, level, scratch and slip resistant surface.
•Compare the technical details with those of your power supplier. If they match, insert the power plug into a power socket. The Universal Battery Charger is now ready for use.
Charging batteries
Danger!
Charge exclusively rechargable batteries of the types
NEVER recharge batteries of other types or non- rechargable batteries. These are not suitable for recharging. They could irreparably damage the Universal Battery Charger and the inserted bat- teries. There is also the danger of a fire as well as an explosion!
•Insert the batteries into the charging slots.
•Press the 9 V Block batteries into the charging slot until they audibly engage.
1 to 8 batteries can be individually charged:
•4 x Type C or Type D batteries in the charging slots 1 to 4, with additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6,
or
•6 x Type AA or AAA in the charging slots 1 to 4, with additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6.
Notice:
Ensure that the batteries are inserted into the charging slots in accordance with their pola- rities. Otherwise, the batteries will not be charged.
•The charging process now begins.
The Universal Battery Charger has an LED for each cell in the charging slot. The LEDs of the respective charging slots show the charge con- dition of the individual batteries.
•In the first 5 seconds the Universal Battery Charger carries out a capacity test:
-The LED of the charging slot glows orange: Capacity between
-The LED of the charging slot glows red: Capacity under 20%.
-The LED of the charging slot glows green: Capacity over 80%.
- 4 -
