KETTLE
Intended Use
This device is intended for heating water for house- hold use. It is not intended for use with other liquids or for commercial use.
Technical Data
Voltage: | 220 - 240 V ~ / 50 Hz |
Power consumption: | 2500 - 3000 W |
In older electrical installations, the building fuse (12A) may be triggered due to the high power consumption.
Items supplied
Water boiler with stand and spout strainer Operating Instructions
Operating elements
qLid
w Unlocking button e ON/OFF switch r Operating light
tBase
y Temperature control
uKettle
i Level indicator o Spout screen
Safety Instructions
To avoid the risk of fatalities from electric shocks:
•Make certain that the base t with the electrical connections never comes into contact with water! Let the base t become completely dry before using if it has accidentally become wet.
•Only use the hot water kettle with the supplied base t.
•Make sure that the power cord never becomes wet or damp during operation. Lay the cord such that it cannot be pinched or otherwise damaged.
•Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury.
•Always pull the plug out of the power socket after use. Switching off the device is not sufficient because the device receives power as long as the power plug is connected to the socket.
Ensure that the appliance, the power cable 
and the power plug are NEVER submersed
in water or other fluids.
To prevent the risk of fire or injury:
•Always heat water with a closed lid q, otherwi- se the automatic
•Hot steam clouds may be released. The kettle u is also very hot during operation. Wear oven mits.
•Make certain that the device rests firmly and ver- tically before switching it on. Boiling water can cause an unstabile kettle to fall over.
•Do not use an external timing switch or a separate remote control system to operate the appliance.
- 2 -
