In order to keep the water warm after bringing it to a boil, set the temperature regulator y in the keep warm range.
Press the ON/OFF switch e down, until it snaps in.
Temperature regulator in the keep warm range The left end of the keep warm range indicates the lower temperature. The right end of the keep warm range indicates the higher temperature.
(The water does not start boiling in the keep warm range!).
•After reaching the desired temperature, the ap- pliance switches off the heating process. The ON/OFF switch e and the operating lights r remain switched on.
Because the device is equipped with a heat maintenance function, the device automatically begins reheating as soon as the water tempe- rature falls below the set temperature.
The appliance heats until the desired tempera- ture is reached. Make sure that the appliance does not automatically switch on to the keep warm function. Therefore, do not leave the appliance unsupervised!
•As soon as the kettle u is lifted from the base t, the ON/OFF switch e jumps out and the operating lights r switch off.
•In order to halt the heating process, push the ON/OFF switch e up again. The operating light r goes out then as well.
Avoid setting the temperature regulator y in the transition range, as the water can start boi- ling on account of varying filling levels.
Cleaning and Care
Danger!: Do not open any part of the housing. There are no operating elements inside. An open housing can create the risk of a
Never submerse any parts of the device in water or other liquids! This can create the risk of a
Before cleaning the device, ....
•First pull the power plug out of the power socket and let the device cool completely.
•Clean the exterior surfaces and the power cord with a slighly damp cloth. Always dry the device well before using it again.
•Never use any cleansers, abbrasive substances or solvents. These can damage the device.
In the event of calcium deposits
•Purchase a decalcifying agent suitable for use with food containers from a household goods stores (e.g. coffee machine decalcifier).
•You can use a suitable product from a specialised dealer for the stainless steel container bottom.
Removing / replacing the spout screen
•Open the lid q completely.
•Press down on the edge of the spout screen o from above in order to remove it toward the insi- de.
•Clean the spout screen o with a lightly moistened wash cloth.
•After cleaning, insert the spout screen o from above and press it firmly into place.
- 4 -
