•Always be attentive! Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don’t feel well.
Technical data
Mains voltage: | |
| 50 Hz |
Rated current : | 0,7 A |
Rated output: | 150 W |
Protection class: | II |
Cutting process for |
|
paper: | Strip cut |
| security level 2 |
Working width: | 217 mm |
Cutting capacity: | 5 Sheets (80g/m2) |
Collection container size: | |
Length | min. 280 mm |
| Max. 410 mm |
Width | min. 115 mm |
Overheating protection
This appliance is fitted with overheating protection. Should the motor overheat due to an overload, the appliance switches itself off automatically. In this case, remove the plug and wait until the appliance has cooled down to room temperature. You can then reconnect the plug to the mains power socket and take the appliance back into use.
We recommend that, after 2 minutes of operation, you allow the appliance to cool down for approx. 60 minutes.
Items supplied
Strip Cut Shredder
Operating instructions
Appliance description
1Switch
2 Cutter opening
3 Power cable
4 Telescope arm
Commissioning
Take note: As every paper shredder is tested for functionality after manufacture, it could hap- pen that paper remnants may be found in the cutters.
•Place the Strip Cut Shredder attachment onto a suitable container:
First place the broad end of the appliance on the edge of the container. Then pull the telescope arm 4 out sufficiently to ensure that this also sits securely on the edge of the container.
•Insert the plug into a mains power socket.
Operation
You can shred up to 5 sheets
Warning:
Remove all staples and paper clips before feeding paper into the cutter opening 2. Otherwise the ap- pliance could be damaged.
- 3 -
