8. Preparing for hot lamination
➩Insert the foil guide rails q in the designated holes on the rear of the laminator.
➩Fold out the document supports s, so that the documents can be pulled in straight into the slot for manual foil feed t.
➩Insert the plug of the laminator into a mains power socket.
➩Provide a firm location for the appliance.
➩Set the selector switch for hot and cold lamina- tion i to "HOT ".
➩Set the foil thickness switch o to the desired foil thickness (80 or 125 microns). The red ON/OFF
indicator lamp 
u will now glow. The lami- nator heats itself up to its operating temperature.
•As soon as the green indicator lamp "Ready"
y glows, the laminator has reached its operating temperature.
Attainment of the operating temperature is indicated by the lighting up of the green LED indicator lamp "Ready" 
y. For a more uniform laminating result we recom- mend, especially for thinner foils (below 125 Micron) and after adjustment to a dif- ferent foil thickness, to first wait an addi- tional
➩Lay the document to be laminated into a lami- nating pouch of the appropriate size.
Make certain that all corners of the docu- ment have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2.
Fig. 1
For information about the lamination process, please read section 10.
Fig. 2
- 5 -
