Konftel 100 manual Calling If your multi-party call is not answered, If the R key does not work

Calling

If your multi-party call is not answered

Press the R key followed by the 1 key to ­return to the first call.

Note: The availability and function of the multi-party feature can vary from country to country but also depend on the PBX to which the Konftel 100 is connected. If you want to connect multiple participants we recommend you use a telephone meeting service. If you have questions regarding availability, please contact your dealer.

If the R key does not work

The requirements for the operation of the R key vary between PBXs and from country to country. Konftel 100 therefore lets you program the R-pulse time so that it works with most PBXs on the market.

Programming the R key (default setting = 2)

Hold down the R key for three seconds until the green

LEDs flash and you hear three short beeps.

1–6...	Enter the value for the R-pulse. The default setting is 2.
	Check in the table below whether the setting is right for
	your PBX/country.
	Value:	Time:
	1 - R function	65 ms
	2 - R function	100 ms
	3 - R function	150 ms
	4 - R function	270 ms
	5 - R function	600 ms
	6 - R function	80 ms

Press the OK key to save the setting and exit.

7

English

Konftel 100 • User Guide