BeskrivelseConnection Tilkoblinglinemode • linjevelgeren

Connection to a PC

The Konftel 300 acts as a loudspeaker and micro­ phone for your PC and in

stand-by mode (not call mode) can be used to play audio and music.

Used with a conference software (e.g. Skype®) the Konftel 300 becomes the ultimate conference system enabling you to hold group calls with other Skype users across the Internet, a large number of local participants round the conference phone, and participants called

via normal phone lines or mobile phones connected to the Konftel 300.

For calls via Skype, the Konftel 300 is put in call

mode and the call is then connected over the Skype network in the usual way.

Connecting and installing the unit

Connect to an analogue line, wireless DECT telephone/mobile phone or PC as illustrated. An optional phone cable is required for connection to DECT/mobile phones.

Plug the Konftel 300 into the mains using the power adapter as illustrated.

The first time the Konftel 300 is started, you will be required to select the region in which you are located. This configures the phone to the telecom network for that region.

Select the region in which you are located. Click OK to confirm your selection.

Select the language you want. Click OK to confirm your selection.

Select MENU > SETTINGS if you want to set the date and time or make other adjustments. Place the conference phone in the middle of the table.

Line mode – switch and combine

An analogue phone line is the pre-programmed option, but it is possible to switch between and combine two connectivity options.

Press the LINE MODE key.

Select a connection option and press OK to confirm.

You can add another line, disconnect or switch between connected lines during a call.

Page 3
Image 3
Konftel 300 BeskrivelseConnection Tilkoblinglinemode linjevelgeren, Connecting and installing the unit, Connection to a PC