22
CONFERENCE GUIDE SETTIN GS
When a multi-party call is going to be connected, a special signal (called flash or R-pulse)
is produced which transmits the command (enquiry, conference and return) to the PBX. It
may be necessary to change the type of signal if calls are connected via a PBX. Different
PBXs may require different signals. These requirements should be specified in the techni-
cal data for the PBX. Settings for the most common PBXs are listed on Konftel’s website.
Select > CONF GUIDE > SETTINGS.
Enter the command for a enquir y for a new dialling tone and press OK to confirm. (“F”
is the default setting.)
Enter the command to connect everyone to a multi-party call and press OK to confirm.
(“F3” is the default setting.)
Enter the command to return to your original call and press OK to confirm. (“F1” is
the default setting.)
If you experience problems making multi-party calls
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.
DISPLAYING CONFER ENCE GUIDE STATUS
Select > CONF GUIDE > STATUS .
The display screen indicates the number of conference groups already stored plus how many more
groups can be added.
CONFERENCE GUID E