FULLY-AUTOMATIC

OPERATION

Full-Auto is the camera’s standard operating mode and is suited for use in almost any situation. When selected, the camera sets the focus and exposure automatically and fires the built-in flash when necessary.

Use Full-Auto when you are just starting out or when shooting under conditions that would require you to constantly adjust the focus and/or exposure.

TAKING PICTURES IN FULL-AUTO1. Slide the main and eye-start switches to ON.2. Press the program-reset button to set the camera to Full-Auto.

• The camera will return to its default settings (p83).

3. If using a zoom lens, rotate the lens’ zooming ring to frame the subject as desired.

4. Center your subject in the focus frame [ ].

or will appear in the viewfinder when focus is confirmed.

If appears in the viewfinder, press the

shutter-release button partway down to pop-up the built-in flash. will disappear, then reappear when the flash is charged.

Continued on next page.

21