USING THE BUILT-IN FLASH

Red-Eye Reduction

Light reflecting from your subject’s eyes may produce the effect known as red-eye. Use the built-in flash’s red-eye-reduction mode to produce more natural looking photographs by reducing the red- eye effect.

1. Turn the function dial to .

REWINDING THE FILM

Automatic Rewind

After you have exposed the last frame, the camera will automatically rewind the film. When the film is completely rewound, the motor will stop and will blink in the data panel indicating it is safe to open the back of the camera.

1. Wait until the film is completely rewound.

• will appear and will blink in the data panel.

2. Press the function button and turn the control dial until and ON appear in the data panel.

• Warn your subject that the flash will fire a few short flash bursts just before the picture is taken.

Cancelling Red-eye Reduction

Turn the function dial to , then press the function button and turn the control dial until and OFF appear in the data panel.

2. Slide the back-cover release down to open the back cover.

3. Remove the film, then close the back cover.

Manual Rewind

Use manual rewind to rewind the film before the current roll is finished.

1.Press the manual-rewind button.

2.Follow steps 1-3 from

Automatic Rewind.

28

29