Connecting the camera to a computer

Confirm the battery has sufficient power before connecting the camera to a computer, the full-battery indicator should be displayed on the monitor and data panel. The use of the AC adapter (sold sepa- rately) is recommended over the use of the battery. For users with Windows 98 or 98 Second Edition, read the section on page 110 on how to install the necessary USB driver before connecting the camera to a computer.

1 Start up the computer. The computer must be on before connecting the camera.

2 Remove the USB-port cover. Attach the smaller plug of the USB cable to the camera. Make sure the plug is firmly attached. The USB-port cover is attached to the body to prevent loss.

3 Attach the other end of the USB cable to the computer’s USB port. Make sure the plug is firmly attached.

• The camera should be connected directly to the

2

computer’s USB port. Attaching the camera to a USB hub may prevent the camera from operating properly.

3

4 Insert the memory card into the camera. To change the memory card while the camera is connected to a computer, see page 118.

5 Turn on the mode dial to any position to initiate the USB connection. While the camera is connected to a computer, the data-transfer screen will be displayed.

108DATA-TRANSFER MODE