GETTING UP AND RUNNING

Inserting batteries

This digital camera uses one CR-V3 lithium battery. Two AA-size Ni-MH batteries can also be used. Do not use other types of AA batteries. When replacing the batteries, the mode dial should be in the off position.

2

1

Open the battery-chamber door by sliding the door toward the bottom of the camera (1) to release the safety catch; the door can then be opened (2).

Insert the battery.

CR-V3- the battery must be inserted with the battery terminals first. The flat side of the battery should face the front of the camera. If the battery does not fit, check its orientation. Never force the battery.

AAbatteries - install as shown in the diagram; make sure the positive and negative battery terminals are oriented correctly.

14GETTING UP AND RUNNING