Changing the lithium-ion battery

This digital camera uses one NP-200 lithium-ion battery. Before using the battery, read the safety warnings on pages 3 and 4 of this manual. When replacing the battery, the camera should be turned off.

Slide the battery-chamber door toward the bottom of the camera to

 

2

 

 

release the safety catch (1). Open the door (2).

 

 

Move the battery latch towards the back of the camera to

4

1

 

insert the battery (3). Slide the battery into the battery cham-

 

 

ber (4) with the battery terminals first until it is caught by the

 

 

latch.

 

 

6

3

To remove the battery, move the latch towards the back of the camera until the battery is released (5). Pull the battery out of the chamber (6).

5

7

Close the battery-chamber door (7) and slide it toward the top of the camera to engage the safety catch (8).

8

• After installing the battery, the set-time/date message may appear on the monitor. The clock and calendar is set in the setup 1 section of the menu (p. 18).

13