>> Camera Digital
Inserting and Removing the SD Card
Images photographed with this camera will be stored on the SD card. Without inserting the SD card, you cannot take photographs using the camera. Before inserting or removing the SD card, make sure that the power of the camera is off.
Inserting the SD card
1.Open the battery/SD card cover.
2.Insert the SD card in the correct orientation shown.
Hold the SD card with its front side of the SD card (printed arrow) facing the rear side of the camera, and then insert
the card as far as it can go.
3. Close the battery /SD card cover.
Removing the SD card
Open the battery/SD card cover, press lightly on the edge of the SD card and it will eject.
If the camera is powered on without an SD card inserted into the camera, the “NO CARD” message appears on the LCD monitor.
To prevent valuable data from being accidentally erased from an
SD card you can slide the write- protected tab (on the side of the SD
card) to “LOCK”.
To save, edit or erase data on an SD card, you must unlock the card.
This camera does not support MultiMediaCardTM.