Playing Back Still Images/Video Clips on a TV
You can also playback your images on a TV screen. Before connecting to any devices, make sure to select NTSC / PAL system to match the video output system of the video equipment you are going to connect to the camera, then turn all connected devices off. It is also recommended to use the Battery Charger/ AC Adapter while transferring the recorded images and video files.
1. | Slide the mode switch to [ | ]. |
2. | Connect one end of the A/V cable to the | |
| conversion adapter terminal of the camera. | |
If you use the conversion adapter to connect the A/V cable, insert the conversion adapter into the conversion adapter terminal of the camera first, and then connect one end of the A/V cable to the A/V terminal of the conversion adapter.
3.Connect the other end to the A/V input socket of the TV set.
4.Turn the TV and camera on.
5.Play back the still images / video clips.
The method of operation is the same as playing back still images and video clips on the camera.
In the case of the PAL system, images are surrounded by a black frame. 
Refer to section in this manual titled “Video Output” in the Setup Menu (In Playback Mode) for further details.
>> Manual User’s