INSTALLING THE SOFTWARE – PC/AT

WINDOWS 95/ WINDOWS 98 WINDOWS NT

Dimâge Scan Elite for Windows Setup installs the Twain and Twain_32 driver software into the drive and folder you select.

•The appearance and/or wording of some dialog boxes may vary depending on the version of Windows running on your machine.

•These installation instructions assume drive D is the CD-ROM drive.

1.Turn on the scanner, then turn on the PC.

2.Start the Windows operating system.

This step varies with your specific operating software...

Windows 95Windows 95 Release 2 (OSR2)

• The New Hardware Found dialog box will

and Windows 98

• The Device Wizard dialog box will appear.

appear.

 

3.Click on Cancel.

•This dialog box may appear several times. Repeat step 3 until the dialog box no longer appears.

3.Click on Next until the Unknown Device window appears…

…then click on Finish.

•This dialog box may appear several times. Repeat step 3 until the dialog box no longer appears.

Windows NT

3.Select Start > Settings > Control Panel, then double-click on the SCSI Adapters icon. Confirm that Minolta #2885 appears as a connected device for your SCSI board.

•If Minolta #2885 does not appear, turn the system off and check all the connections. Repeat the procedure.

4.Insert the Dimâge Scan Elite CD-ROM into the CD- ROM drive.

12