SINGLE-SHOT AF

Remote control (sold separately)

The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away. The remote control unit can be used in movie recording (p. 75).

Place the camera on a tripod, and set the drive mode to self-timer / remote control

(p. 38, 55).

Arrange the camera and subject to compose the picture. When setting up the camera, make sure the subject is within the focus frames.

• Focus lock cannot be used with the IR remote control.

• Focus area selection (p. 50) and manual focus (p. 65) can be used.

Emitter window

Delay button

Release button

While pointing the emitter window of the remote control unit toward the camera, press the release button or the delay button to take the picture.

•When the release button is pressed, the self-timer lamp on the front of the camera will blink once before the picture is taken.

•When the delay button is pressed, the self-timer lamp on the front of the camera will blink for two seconds before the picture is taken.

•The remote control may not operate with backlit subjects or under fluorescent light.

43