Konica Minolta KD-300Z White Balance, Using Color Mode for B&W and Sepia Images

Using Color Mode for B&W and Sepia Images

In addition to the normal color picture mode, you can also take pictures in black and white (B/W) or sepia tone (Sepia).

¶B/W and sepia picture modes cannot be selected when image quality is set for uncompressed TIFF-RGB [T] format.

White Balance

An image’s color will change depending on the kind of light source present. Select the white balance as follows to compensate for different light sources.

1Press the “MENU” button.

2Press the “#” button to select

[ ], then press the “” button to confirm the selection.

3Select [COLOR MODE], then press the “#” button.

4Press the “%” or “ﬁ” button to select either [SEPIA] or [B/W] mode.

5Press the “@” button.

6Press the “MENU” button twice to turn off the menu display.

Display appearance when [SEPIA] mode is selected.

7Press the shutter release button to take the picture.

[AUTO] (default) In this mode, the white balance is set automatically by the camera.

[	]		Bright sun
[	]		Incandescent light bulbs (Tungsten)
[	]		Cloudy weather
[		]	Fluorescent light
[		]	Fluorescent light
[PRESET]			Use this setting when you wish to set the white balance
			manually. Instructions for setting the white balance can
			be found on page 33.

<Operation>
1 Press the “MENU” button.	3 Press “%” or “ﬁ” button to
	select [WB MODE], then press
	the “#” button.

2 Press the “#” button and

select [

], then press the

4 Press “%” or “ﬁ” button to

“ ” button to confirm the

select the desired white

selection.

balance mode ([

], [

[

], or [

]).