5Press the “@” button.
6Press the “MENU” button twice to turn off the menu display.
Display appearance when [
] is selected.
Use this function to manually set the white balance value. It allows you to select what part of the subject you wish to serve as the standard for “white” in the final image. For more exacting settings, use of a piece of white paper or cardboard is recommended.
¶Electronic zoom must be disabled when setting the preset white balance value.
7Press the shutter release button to take the picture.
<Operation>
1Select [PRESET], then press the “
” button to confirm selection.
2Point the camera at the white part of the subject or other material you wish to serve as the white standard in the image.
Make sure the white material fills up the entire screen as shown.
3Press the “
” button to set the white balance.
4Press the “MENU” button twice to turn off the menu display.
Display appearance when [PRESET] is selected.
5Press the shutter release button to take the picture.
32 | 33 |