INSTALLING BATTERIES

The camera requires two 3V CR2 lithium batteries to operate. Read the proper and safe use section on page 2 before using the batteries. When changing batteries, confirm the function dial is in the off position.

Slide the battery-chamber release in the direction shown, and open the door. Setting the camera down with the battery-chamber door open may damage the camera.

Insert the batteries as indicated on the diagram next to the battery chamber-door. Confirm the positive and negative battery terminals are oriented correctly.

Push the battery-chamber door closed until it clicks into place.

Date Model

The date display will blink when the camera is turned on until the clock and calendar are set. To set the camera’s clock and calendar, see page 18.

The clock and calendar are powered by the camera batteries. If the batteries are removed, the date and time are reset, and the date- imprinting function is disabled. To save the date and time when changing batteries, see page 19.

14 GETTING STARTED