Flash picture is too dark.

When using the built-in flash, the bottom of the picture is dark.

Subject is beyond flash range.

Lens hood was attached or subject distance was less than 1m (3.3ft).

Make sure the subject is within the flash range.

Remove the lens hood. To prevent lens shadowing, the subject must be at least 1m (3.3ft.) from the camera.

Err appears on the data panel.

Remove the batteries. Reinsert them after turning the camera off and on. If normal camera operation does not resume or the camera malfunctions repeatedly, contact an authorized Konica Minolta service facility.

CAUTION: opening the back cover without rewinding the film will fog the pictures; use a film changing bag, completely dark room, or place the camera under a thick blanket.

To remove the film from the camera in case of a malfunction, use the following procedure:

1.Turn the camera off.

2.Open the back cover.

3.Gently pull the film off the take-up spool and rewind it back into the cartridge.

Contact an authorized Konica Minolta service facility.

59