VIEWING IMAGES ON A TELEVISION

It is possible to view camera images on your television. The camera has a video-out terminal which can be used to connect the camera to a television using the supplied AV cable. The camera is compatible with the NTSC and PAL standards. The video-output setting can be checked and set in the advanced 2 section of the setup menu (p. 118).

1.Turn off the television and the camera.2.Insert the mini-plug end of the AV cable into the camera’sAV-out terminal.

3.

Plug the other end of the AV cable into the video and

 

 

audio input terminal on the television. The yellow plug is

2

 

for the video output, and the white plug is for the monaur-

 

al audio output.

 

4.

Turn the television on.

 

5.

Change the television to the video channel.

3

6. Turn the camera’s mode dial to the playback position. The camera’s monitors will not activate when the camera is attached to a television. The playback-mode display will be visible on the television screen.

7.View images as described in the playback section. Use the television controls to adjust the vol- ume of the audio playback. Because of the broadcast standard used to display television images, image quality and resolution will appear lower than when displayed on a computer monitor.

39