CONTINUOUS ADVANCE

The continuous-advance drive mode allows a series of images to be captured while holding down the shutter-release button. Continuous advance acts like a motor drive on a film camera. The number of images that can be captured at one time and the rate of capture depend on the image-quality and image-size setting. The maximum rate of capture is 1.3 fps. The continuous-advance mode is set with the drive-mode button (p. 32).

When the shutter-release button is pressed and held, the camera will begin recording images until the maximum number has been taken or the shutter button is released. This mode cannot be used with super-fine images (p. 41). The built-in flash can be used, but the rate of

capture is reduced because the flash must recharge between frames.

1

Compose the picture as described in the basic recording operation section (p. 23). Press the shutter-release button partway down to lock the exposure and focus for the series. Press and hold the shutter-release button all the way down (1) to begin taking pictures.

The following chart lists the maximum number of images that can be captured with different image-quality and image-size combinations.

 

Image

2272 X 1704

1600 X 1200

1280 X 960

640 X 480

Image

Size

Quality

 

 

 

 

 

 

 

 

 

 

 

Fine

 

7

12

17

38

 

 

 

 

 

 

Standard

 

10

18

26

53

 

 

 

 

 

 

Economy

 

16

28

36

66

 

 

 

 

 

 

35