Konica Minolta TC-X manual Exposure compensation

1)Attach the Konika X-20N AUTO to the hot shoe (13) on the camera.

2)Switch from AE to manual aperture mode and set the aperture at f/4 (ISO 100) or at f/8 (ISO 400), according to the film speed.

3)Set the shutter speed to 1/60 sec.4.butkus.org

4)Set the power switch of the electronic flash at "A" and wait until the Flash Ready Light goes on for the flash photography.

*Ordinary electronic flash units of the hot-shoe type may also be used with the Konica TC-X with shutter speed set at 1/60 see or slower, and manual aperture setting.

Correct aperture value can be calculated from the guide number (GN) of the flash unit. Divide the GN by the distance, in meters, from camera to subject to get correct aperture ("f" number). For example, if the flash unit's GN is 20, and distance from camera to subject is 5 meters, f/4 will be the correct aperture value.(20 / 5 = 4)

Exposure compensation