5.Loading film

1)Turn the power switch (2) "on." Pull the rewind knob (16) all the way out and the back cover (37) of the camera will open.

2)Place a roll film into the film cassette chamber (31), then push the rewind knob all the way back down.

3)Pull the tip of the film out a few centimeters until it reaches the film take-up spool (39). Then insert the tip into the slit in the take-up spool.

4)Turn the film advance lever (1) and make sure the holes in the edge of the film fit on the teeth of the sprocket (40). Now close the back cover tightly.

5)Raise the film rewind crank (15) and turn it slightly in the direction of the arrow to reduce slack of the film inside the magazine.

Page 10
Image 10
Konica Minolta TC-X manual Loading film