APPENDIX

TROUBLESHOOTING

The section covers minor problems with basic camera operation. For major problems or damage, or if a problem continues to reoccur frequently, contact a Konica Minolta service facility.

Problem Symptom

CauseSolution

Access lamp turns red when pressing the main switch

The camera will not

work.

Nothing displayed on the monitors.

Pictures are

Focus signal is

not sharp.

red.

The batteries are dead.

AANi-MH batteries are inserted incorrectly.

Subject is too close.

The camera is in macro mode.

A special situation is preventing the autofo- cus system from focusing (p. 25).

Replace batteries (p. 13).

Reinsert the batteries taking care that the negative and positive terminals are oriented as indicated on the inside of the battery chamber door (p. 13).

Make sure the subject is within the autofocus range (p. 24) or use the macro mode (p. 35).

Cancel the macro mode setting (p. 35).

Use the focus-lock function to focus on an object at the same distance as the subject (p. 24) or use manual focus (p. 59).

120 APPENDIX