Memory cards

SD Memory Cards and MultiMediaCards are manufactured with precision electronic components. The following may cause data loss or damage:

•Improper use of the card.

•Bending, dropping, or subjecting the card to impact.

•Heat, moisture, and direct sunlight.

•Static electrical discharge or electromagnetic fields near the card.

•Removing the card or interrupting the power supply while the camera or a computer is accessing the card (reading, writing, formatting, etc.).

•Touching the electrical contacts of the card with your fingers or metal objects.

•Using the card beyond its life. Purchasing a new card periodically may be necessary.

The response time is longer with MultiMediaCards compared with SD Memory Cards. This is not a defect, but rather due to the specifications of the cards. When using large capacity cards, some operations like deletion may take longer.

SD Memory Cards have a write-protect switch to prevent image

 

 

 

 

 

 

 

 

 

Write-

 

 

 

 

 

 

data from being deleted. By sliding the switch to the bottom of

 

 

 

 

 

 

 

 

 

 

 

 

 

the card, the data will be protected. Images cannot be recorded

 

protect

 

 

 

 

 

 

when the card is protected. If an attempt is made to record or

 

switch

 

 

 

 

 

 

 

 

 

 

 

 

delete an image with the camera, the card-locked message will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appear on the monitor.

 

Lock

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Memory cards should not be used to permanently store image

 

position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

data. Always make a copy of camera files on an appropriate

 

 

 

 

 

 

 

 

storage device or recording media. Konica Minolta has no

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

responsibility for any loss or damage to data.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

124 APPENDIX