Korg 61key, 73key, 88key Recording multiple tracks from an external sequencer

Recording Recording multiple tracks from an external sequencer
63
Recording multiple tracks
from an external sequencer
TheplaybackfromanexternalMIDIsequencer
connectedtotheKROMEcanberecorded
simultaneouslyusingmulti‐recording.
1. MakesurethattheMIDIOUTofyourexternal
sequencerisconnectedtotheMIDIINofthe
KROME.
Ifitisnotconnected,turnoffthepower,makethe
connection,and���thenturnthepoweron.
2. IntheGlobalP1:MIDI–MIDIBasicpage,set
MIDIClocktoExternalMIDI.Withthissetting,
theKROMEwillsynchronizetoMIDIclock
messagesfromyourexternalsequencer.
MakesurethatReceiveExt.RealtimeCommandsis
checked.
3. CreateanewsonginSequencermode,andinthe
P0:Play/REC–Preferencespage,checktheMulti
RECcheckbox.SetRecordingSetuptoOverwrite.
4. PressPlay/Rec/Mutetoselect“REC”forthetracks
youwanttorecord.
Forthetracksyoudon’twanttorecord,selectPlayor
Mute.
5. IntheP3:TrackParameters–MIDIT01–08and
T09–16page,useMIDIChanneltospecifythe
MIDIchannelofeachtrack.
SettheMIDIchannelofeachKROMEtracktomatch
theMIDIchannelofeachexternalsequencertrack.
Datafromeachchannelwillberecordedonthe
correspondingKROMEtrack.
MakesurethatStatusissettoINTorBTH.
6. PresstheLOCATE()buttontosetthelocation
to001:01.000.
7. PresstheSEQUENCERREC(●)buttontoenter
record‐standbymode.
8. Startyourexternalsequencer.
TheKROME’ssequencerwillautomaticallybegin
recordingwhenitreceivestheMIDIStartmessage
transmittedbyyourexternalsequencer.
9. Whenplaybackhasended,stopyourexternal
sequencer.
TheKROME’ssequencerwillautomaticallystop
recordingwhenitreceivestheMIDIStopmessage
transmittedbytheexternalsequencer.Youcanalso
stoprecordingbypressingtheSTART/STOP()
buttonontheKROME.
Afterthis,youcanplaybackthenewlyrecorded
sequence:
10. IntheGlobalP1:MIDI–MIDIBasicpage,set
MIDIClocktoInternal.
SetTempo ModetoAutointheSeqP0:Play/REC–
ProgramT01–08page.
PresstheSTART/STOP()buttontoplayback.
Note:Ifthecorrectsoundsarenotselectedwhenyou 
startplayingback,youmaybeabletosolvethe
problembyusingthemenucommandEventEdit(P6:
TrackEdit)tore‐specifytheProgramChangedata.