9
2.Front and rear panel
2.Front and rear panel
1
6
2
3
4
5
7
8
Synthesizer section
1. OSCILLATOR
This produces the basic wa veform.
PORTAMENTO
This smoothly connects changes in pitch.
OSC BALANCE (oscillator balance)
When OSC MOD is off and you are using
RING or SYNC, this knob adjusts the level
balance of the tw o oscillator s. When you are
using CROSS, this knob adjusts the depth
of oscillator modulation.
OSC2 PITCH OFS (oscillator 2 pitc h offset)
Adjust the pitc h diff erence between OSC1 and OSC2.
OSC1 (oscillator 1 wave)
Select the waveform for OSC1.
OSC2 (oscillator 2 wave)
Select the waveform for OSC2.
OSC MOD (oscillator modulation)
Specify the type of oscillator modulation.
2. Original value LED
This will light when the knob y ou are currentl y moving reac hes the v alue of the original
saved sound of the pattern.
3. MOTION SEQ (motion sequence)
This function allo ws you to loop knob mo vements. Eac h time you press this ke y, the setting
will alternate between Off (dark), SMOOTH, and TRIG HOLD.
4. PART SELECT key
Each time you press this key, PART 1 and PART 2 will alternate as the part selected for editing.
5. Synthesis diagram
This is a block diagram for the synthesizer section of the EA-1mk
II
.
6. FILTER
These controls let you adjust the brightness of the sound or add a distinctive tonal character.
CUTOFF: Adjust the cutoff frequenc y of the filter .
RESONANCE: Adjust the resonance of the filter .
EG INT (EG intensity): Adjust the depth of the filter en velope .
DECAY: Adjust the deca y speed of the filter en velope .
7. AMP
Here you can adjust the v olume le vel and the distor tion eff ect.
DISTORTION: Switch distor tion on/off.
LEVEL: Adjust the volume le vel.
8. EFFECT
Here you can ad d eff ects to the sound.
DEPTH: Adjust the depth of the eff ect (tempo dela y, chorus/flanger).
TIME: Adjust the dela y time, or the speed of the c horus/flanger LFO.
TYPE SELECT: Choose the eff ect (tempo dela y or c horus/flanger) that will be adjusted
by the Depth and Time contr ols.