AX3000G EasyStart
2.Press either the BANK UP or BANK DOWN switch to select “BANK 2”. (When you’re selecting a bank, the bank number will flash in the BANK display).
3.Press the PROGRAM SELECT 3 switch. Program
!If the LED in the upper left of the Bank Up switch is lit green, Individual Mode is selected. Press the BANK UP switch to choose Program Select mode.
Saving a Program
You’ve tweaked and turned some knobs, and you like the changes that you’ve made – now to save your program:
1.Press the WRITE button. The name display indicates “*WRITE*”, and the BANK display and PROGRAM LED’s
2.Use VALUE KNOB 1, the ▲/▼ buttons, or the BANK UP/DOWN switches to select the bank you want to use; then use the </> buttons, or PROGRAM SELECT switches to select the destination program
3.Press the WRITE button once again. The program will be saved, the name display will indicate “COMPLETE,” and you’ll return to Program Select mode.
!The
Individual Mode
In this mode, you can individually turn each effect type on or off just as if you were using a collection of stomp boxes. You can select INDIVIDUAL mode from any program.
1.To enter INDIVIDUAL mode from PROGRAM SELECT mode, press and hold the BANK UP switch for about one second; the LED above the BANK UP switch will light green.
Here’s how to switch the
2.Press the “program select” switch 1 to turn the
3.Press the BANK DOWN switch to turn the reverb on/off. The LED at the upper left of the BANK DOWN switch will be lit or dark to indicate the reverb’s on/off state.
4.To exit INDIVIDUAL mode, press the BANK UP switch, and the green LED will go dark (not lit).
Expression Target Quick Assign
Here you can easily assign many effect parameters of the AX3000G to its expression pedal for real time live control! For example, you can assign the speed of a modulation effect, time of a delay, or mix of the reverb to the expression pedal. And of course, the expression pedal can also act as a volume pedal or wah pedal effect.
As an example, let’s assign the Pitch parameter of the PITCH SHIFTER to the expression pedal:
1.Use the Modulation MODEL SELECTOR to choose the PITCH SHIFTER.
2.Rotate VALUE KNOB 1 or use the </> buttons to select the “PITCH” parameter. (PITCH” will be indicated in the LCD)
3.In this state, press and hold the EXP/CTL button for one second, the name display will indicate “COMPLETE”.
That’s it! The PITCH parameter has now been assigned to the expression pedal, letting you control the amount of PITCH SHIFT.
3