19
1Press the FLAT button.
The Flat Tuning indicator will blink, and the
display will show the current number of flats.
Flat tunning indicater
2Use the UP or DOWN buttons to specify the
number of flats.
You can specify a number of flats in the range
of 0–7. If you specify a setting other than 0,
the Flat Tuning indicator will light.
If you decide to cancel the change you
made, press the TUNER ON/OFF switch or
press the INPUT SELECT switch to change
between A or B.
3Press the STORE button.
The INPUT SELECT indicator will blink. If
the A and B settings are identical, the A and B
indicators will blink. If the A and B settings
differ, the indicator selected by the INPUT
SELECT switch will blink.
4
Use the UP button, DOWN button, or INPUT
SELECT switch to select the internal memory
in which you want to store the setting.
5Press the STORE button once again.
The selected flat tuning setting will be stored
in the internal memory you specified, and the
pitchblack+ will return to tuning mode.
When you press the STORE button, the
calibration, tuning mode, flat tuning, and
display mode settings will all be saved at
the same time (☞p.14).