PROG P1: Basic/DT/Ctrls 1–3: DrumTrk Pattern (Drum Track Pattern)
29
1–3: DrumTrk Pattern
(Drum Track Pattern)
Here you can select a drum track pattern and specify how it
will sound.
For details on the available parameters and menu
commands, please see “1–3: DrumTrk Pattern (DrumTrack
Pattern)” on page 28 of the M3 parameter guide.
1–4: DrumTrk Program
(Drum Track Program)
Here you can select the drum program that will be used by
the drum track.
For details on the available parameters and menu
commands, please see “1–4: DrumTrk Program (DrumTrack
Program)” on page 29 of the M3 parameter guide.
1–5: X–Y Setup
Here you can make settings for X–Y control.
For details on the available parameters and menu
commands, please see “1–5: X–Y Setup” on page 31 of the
M3 parameter guide.
1–6: Controllers Setup
Here you can specify the SW1 and SW2 switch and 5–8
slider functions of the program when Control Assign
REALTIME CONTROL is selected.
For details on the available parameters and menu
commands, please see “1–6: Controllers Setup” on page 35
of the M3 parameter guide.
1–7: Pads 1–4 Setup,
1–8: Pads 5–8 Setup
There are eight velocity-sensitive trigger pads below the
display. These look like drum machine pads, and playing
drum sounds is certainly one use for them.
For details on the available parameters and menu
commands, please see “1–7: Pads 1–4 Setup, 1–8: Pads 5–8
Setup” on page 36 of the M3 parameter guide.