TV Display Setting
Path: General Page TV Display
Selects the aspect ratio of the TV set to be connected.
NORMAL/PS (4:3 Pan & Scan mode):
Used when you connect a normal TV to the system. Displays a wide picture on the whole TV screen with a portion (right and left sides of the picture) automatically cut off.
NORMAL/PS
NORMAL/LB (4:3 Letterbox mode):
Used when you connect a normal TV to the system. Displays a wide picture with bands displayed on the upper and lower portions of the screen.
NORMAL/LB
WIDE (16:9
Used when you connect a
TV Type Setting (Multi/NTSC/PAL)
If you live in North America your TV broadcast system is NTSC, your TV set is either a NTSC TV or a multi system TV, and the DVD movies you buy or rent will be labeled NTSC system. The initial Default TV Type setting of this system is “NTSC”. This setting will allow NTSC discs to play properly on NTSC TVs. If you live in North America no further adjustment is necessary. You can skip to the next section.
If you wish to change the TV Type setting follow the 3 steps below.
1.Press SETUP button to enter SETUP MENU. Use / to select GENERAL SETUP, and then press ENTER button.
2.Highlight TV TYPE using /, then press button to go to the right option list. Select NTSC or PAL using /, then press ENTER to confirm your selection.
3. Press SETUP again to exit SETUP MENU.
Note:
When the power is switched off, or the disc drawer is opened, the TV type will automatically revert back to the initial Default setting.
WIDE
Notes:
Some
Depending on the DVD, 4:3 Letterbox may be selected automatically instead of 4:3 Pan & Scan and vice versa.
You must also set the screen mode on your
If WIDE is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin).
Video Out
Select the color video type and switch mode to fit your connector type:
SCART/CVBS: Select when using CVBS composite Video Output (if
YUV: Select when using Component Video Outputs.
31
