![](/images/new-backgrounds/1192108/19210853x1.webp)
c)Reading data
To read the data, the current state of this product can be understood.
Sending
1. Character (reading data command)
2. Return
Receiving
1. State of selection of CAT5
2. Delimiter (;)
3. State of selection of SUB
4. Return
(Ex.1) When IN3 is selected for CAT5 OUT and IN4 is selected for SUB OUT. | ||||
Sending | W | return |
|
|
ASCII Character representation |
|
| ||
HEX representation | 57H | 0DH |
|
|
Receiving | C | ; | D | return |
ASCII Character representation | ||||
HEX representation | 43H | 3BH | 44H | 0DH |
(Ex.2) When OFF is selected for CAT5 OUT, IN4 is selected for SUB OUT. | ||||
Sending | W | return |
|
|
ASCII Character representation |
|
| ||
HEX representation | 57H | 0DH |
|
|
Receiving | Q | ; | D | return |
ASCII Character representation | ||||
HEX representation | 51H | 3BH | 44H | 0DH |
※Do not send together with control command consecutively.
5-3-2. Registration method
Special software is needed for the command registration. Please see instruction manual for the special software.