![](/images/new-backgrounds/1192108/19210865x1.webp)
8.Trouble shooting
Problem | Please check the following |
The video can't be | ● Is the power of the connection equipment turned on ? |
seen | ● Is the power adapter cable properly connected to |
| |
| ● Is the POWER CONT button of this product turned on? |
| ● Is the CAT5e or CAT6 cable properly connected to OUT 1 |
| or OUT2 of this product? |
| ● Isn't unexpected fore applied to the CAT5e or CAT6 cable |
| connected to OUT1 or OUT2 of this product ? |
| ● Is the cable properly connected to the video input connector? |
| ● Is the INPUT button properly selected ? |
| ● Is the CAT5,SUB button properly selected ? |
| ● Are cables properly connected to IN connectors? |
| ● Is the length of the cable within the recommended maximum |
| transmission distance ? |
| ● Are the cables wired correctly? |
| ● Is the power of the twisted pair receiver turned on ? |
| ● Did you adjust a LEVEL /PEAKING of a twisted pair receiver? |
The video is | ● Is the twisted pair cable near the AC line? It should be far |
flickering or there | from the line. |
is noise | ● Is there a source causing noise close to AC adapter of this |
| product ? A noise filter should be used in case of noise. |
| ● Is the CAT5e or a CAT6 cable properly connected to OUT 1 or |
| OUT2 of this product ? |
| ● Isn't unexpected fore applied to the CAT5e or CAT6 cable |
| connected to OUT1 or OUT2 of this product ? |
| ● Is the cable properly connected to the video input connector |
| of this product? |
| ● Are cables properly connected to IN connectors? |
| ● Is the length of the cable within the recommended maximum |
| transmission distance? |
| ● Did you adjust a LEVEL /PEAKING of a twisted pair receiver? |
Sound can't be output ● Is the power of the connection equipment turned on ?
●Is the POWER CONT button of this product turned on?
●Is the power adapter cable properly connected to
●Is the INPUT button properly selected ?
●Is the CAT5,SUB button properly selected ?
●Is the CAT5e or CAT6 cable properly connected to OUT 1 or OUT2 of this product?
●Isn't unexpected fore applied to the CAT5e or CAT6 cable connected to OUT1 or OUT2 of this product ?
●Is the cable properly connected to the AUDIO IN connector of this product?
●Is the power of the twisted pair receiver turned on ?
●Is the length of the cable within the recommended maximum transmission distance?
Reference
-
-
-
-
-
-
→1-2.General information
→3-2.Preparation of cable
-
Please refer to the instructions manual of the receiver with this product.
-
-
-
-
-
Please refer to the instructions manual of the receiver with this product .
- - -
- - -
-
-