Kramer Electronics 602T user manual 4.3Avoiding Pitfalls During Operation

Models: 602T

1 14
Download 14 pages 44 Kb
Page 11
Image 11
4.3Avoiding Pitfalls During Operation

4.3Avoiding Pitfalls During Operation

If any of these problems occur, we recommend the following:

If the display device shows only a black screen:

Check that all the AC and DC plugs and jacks used by the external power supplies are firmly connected

Check that the DVI ports are firmly plugged into the computer and the display device, and be sure that the transmitter and receiver modules are correctly plugged into the computer and display device, respectively

Check if the computer and display are powered ON and properly booted

Reset the system by unplugging and then replugging the transmitter DVI port or receiver DVI port and then reboot the system

If the screen is distorted or displays noise:

Check if the graphics resolution is properly set

Go to the Display Properties of Windows and check the settings

Be sure that the resolution is set for WUXGA (1920 x 1200) at 60Hz, or lower

Reset the system

Disconnect and reconnect the optical DVI cables

iBe sure that at all times the cables are stored and used away from liquid or dirt.

8

602T, 602R - Using the Two-fiber Detachable Optical DVI System

Page 11
Image 11
Kramer Electronics 602T user manual 4.3Avoiding Pitfalls During Operation