Connecting the 6810HDxl | Kramer Electronics 6810HDx1 guide

4 Connecting the 6810HDxl

i	Always switch off the power to each device before connecting it to your

	6810HDxl. After connecting your 6810HDxl, connect its power and
	then switch on the power to each device.

To connect the 6810HDxl , as illustrated in the example in Figure 2, do the following:

1.Connect an SD/HD/3G HD-SDI source (such as, an HD/SD digital video player) to the SDI IN BNC connector.

2.Connect the SDI OUT BNC connector to an SDI and AES/id3 acceptor (such as, video broadcast equipment).

3.Connect an AES digital audio source (such as, DAT Player 4) to the AUDIO IN TO EMBEDDER 4 BNC connector (for channel 4).

4.Connect the AUDIO OUT TO DE-EMBEDDER BNC connector (for channel 1) to an AES digital audio acceptor (such as, DAT Recorder 1).

5.Connect the SDI LOOP BNC connector to an SDI acceptor (such as, an SDI display).

6.Connect the 5V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 2).

6	6810HDxl - Connecting the 6810HDxl