Using Your 7508 CV/YC to SDI Converter
Figure 2: Connecting a 7508 CV/YC to SDI Converter
5.1Connecting a PC
You can connect to the unit via a crossed RS-232 connection, using for example, a PC. A crossed cable or null-modem is required as shown in method A and B respectively. If a shielded cable is used, connect the shield to pin 5.
Method A (Figure 3)—Connect the RS-232 9-pin D-sub port on the unit via a crossed cable (pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5) to the RS-232 9-pin D-sub port on the PC.
Note: There is no need to connect any other pins.
6 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
